Euro Rear Signals - Complete - Page 2

SoonerNation · June 28th, 2012, 04:30 PM

Quote:

Originally Posted by nyandy

Sooner, or anyone else. Where'd you guys get the euro signals? Thanks.

My dealer had quite a few in stock. I believe they fit another model bike as the boxes said "front signal" on them.

nyandy · June 28th, 2012, 07:56 PM

Quote:

Originally Posted by SoonerNation

My dealer had quite a few in stock. I believe they fit another model bike as the boxes said "front signal" on them.

Awesome. You actually just cleared up something that had been bugging me. Called my local shop and red the parts guy the number and he says; "euro front markers right?" Threw me for a bit of a loop, but just figured they were a universal front rear fit. Thanks again Sooner. Much apreciated and dig on the stock look myself too.

iiiofiv · July 21st, 2012, 09:19 PM

I just finished installing mine. It was a piece of cake to do. It took about 30 minutes start to finish.

They have two lights per indicator vice the one in the stock.

And, I think they look better than the stocks too.

Gunny Fitz · July 22nd, 2012, 06:53 AM

Glad to see other 99 riders are out there getting this info and doing the same mods to the rear signals! I got this idea from another member, and buddy, and am soooooo pumped I made this decision! When I told dealer I wanted them they didnt know what for. Then after they were mounted they were literally pulling customers off the floor to bring them back and see the tail tidy and signal mod! We need to spread this out to as many folks as possible.

Dont get caught up wearing those huge wings / ears on your marker plate assembly, get the simple plug and play front turn signals on your REAR!!!

(I posted a pic of the box in my thread with part number for all to copy down)

My First In Depth Tri-Colore Service

Gunny Fitz · July 22nd, 2012, 06:53 AM

Quote:

Originally Posted by SoonerNation

My dealer had quite a few in stock. I believe they fit another model bike as the boxes said "front signal" on them.

This is absolutely correct! I believe it is the multi strada but may be wrong.

anthem · July 22nd, 2012, 06:06 PM

personally I still prefer the look of the rizoma signals to Ducati's euro. Also brighter and more visible in a smaller package.

TransNone13 · July 22nd, 2012, 06:11 PM

Quote:

Originally Posted by anthem

personally I still prefer the look of the rizoma signals to Ducati's euro. Also brighter and more visible in a smaller package.

I agree, I would like to see their fender kit soon too. But the DP one with the Euros still looks SO much better.

NoGoodID · August 26th, 2012, 06:53 PM

I currently have the stock rear signals mounted to the DP fender eliminator kit. Aside from looking too big, the stock signals hang/droop pretty significantly from the DP fender eliminator (more so then when they were mounted to the stock bracket). Does anyone know whether the euro signals will fit flushly without hanging/drooping off of the DP fender eliminator?

CaliDuc · August 26th, 2012, 07:12 PM

Quote:

Originally Posted by anthem

personally I still prefer the look of the rizoma signals to Ducati's euro. Also brighter and more visible in a smaller package.

Agreed. I went with black Rizoma rear turn signals

Gunny Fitz · August 26th, 2012, 07:37 PM

Quote:

Originally Posted by NoGoodID

I currently have the stock rear signals mounted to the DP fender eliminator kit. Aside from looking too big, the stock signals hang/droop pretty significantly from the DP fender eliminator (more so then when they were mounted to the stock bracket). Does anyone know whether the euro signals will fit flushly without hanging/drooping off of the DP fender eliminator?

The answer is YES! They are plug n play, fit tight and flush, and dont droop. Here is the part number for ya even!

Ya cant even see them from below can ya?

NoGoodID · August 26th, 2012, 08:09 PM

Quote:

Originally Posted by Gunny Fitz

The answer is YES! They are plug n play, fit tight and flush, and dont droop. Here is the part number for ya even!

Ya cant even see them from below can ya?

Thanks Gunny! They look great...and nope can't see them from below...pretty cool.

iiiofiv · August 26th, 2012, 08:12 PM

I installed them too.

Took less than an hour and they really are plug-n-play.

They look so much better than the stockers.

bradp51 · August 26th, 2012, 10:19 PM

Quote:

Originally Posted by iiiofiv

I installed them too.

Took less than an hour and they really are plug-n-play.

They look so much better than the stockers.

And the best part.

In Australia they come stock.

flobrandx · August 27th, 2012, 06:34 AM

Quote:

Originally Posted by CaliDuc

Agreed. I went with black Rizoma rear turn signals

Can you post some pics of the Rizoma's installed? Silly question for you Cali, but are they installed on the DP eliminator? I know you have all DP parts known to man and Ducati

CaliDuc · August 28th, 2012, 11:13 AM

Quote:

Originally Posted by flobrandx

Can you post some pics of the Rizoma's installed? Silly question for you Cali, but are they installed on the DP eliminator? I know you have all DP parts known to man and Ducati

Yes, I have them on with the DP eliminator. My bike is currently in the shop being upgraded, so hang on a week and a bit and I will post some pics.

allesisvoorbassie · August 28th, 2012, 11:29 AM

If there is someone who want to have mine,I give them for free the only thing you have to pay is the shipping to your adress!!

NoGoodID · September 1st, 2012, 03:37 PM

Had the Ducati euro lights installed yesterday...they look great...but mine do sag just a little (but a lot less than the stock lights did).

Svendiesel · September 1st, 2012, 05:33 PM

This is definitely something Id like to do, great idea.

July 22nd, 2012, 06:53 AM	#24
Gunny Fitz Senior Member Joined: Mar 2012 From: Washington, DC Posts: 1,576 Thanks: 285 I Ride: Panigale Tri-Colore W "Bling!"	Spread the Word ! Glad to see other 99 riders are out there getting this info and doing the same mods to the rear signals! I got this idea from another member, and buddy, and am soooooo pumped I made this decision! When I told dealer I wanted them they didnt know what for. Then after they were mounted they were literally pulling customers off the floor to bring them back and see the tail tidy and signal mod! We need to spread this out to as many folks as possible. Dont get caught up wearing those huge wings / ears on your marker plate assembly, get the simple plug and play front turn signals on your REAR!!! (I posted a pic of the box in my thread with part number for all to copy down) My First In Depth Tri-Colore Service

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
complete worshop manual	mrmaloo32	Ducati 1199	45	April 19th, 2013 03:07 AM
Pic of Euro Spec Rear Turnsignals	cgalford	Ducati 1199	21	June 22nd, 2012 08:34 PM
Rear turn signals	Hitter11	Ducati 1199	25	June 18th, 2012 06:18 PM
turn signals	kgk	Mechanical and Technical	6	May 19th, 2012 10:15 PM
First Service Complete	JayKay	Ducati 1199	40	April 22nd, 2012 08:51 AM

July 21st, 2012, 09:19 PM	#23
iiiofiv Senior Member Joined: May 2012 From: San Francisco Posts: 219 Thanks: 1 I Ride: Ducati: S4RS Tricolore, 1199S Tricolore; Triumph: Tiger 1050, Thunderbird 1700	I just finished installing mine. It was a piece of cake to do. It took about 30 minutes start to finish. They have two lights per indicator vice the one in the stock. And, I think they look better than the stocks too.

July 22nd, 2012, 06:06 PM	#26
anthem Senior Member Joined: May 2012 From: East Coast Posts: 505 Thanks: 106	personally I still prefer the look of the rizoma signals to Ducati's euro. Also brighter and more visible in a smaller package.

August 26th, 2012, 06:53 PM	#28
NoGoodID Member Joined: Mar 2012 From: Las Vegas, NV Posts: 97 Thanks: 0 I Ride: 2012 Ducati 1199 Panigale S (ABS); and 2010 BMW K1300S	I currently have the stock rear signals mounted to the DP fender eliminator kit. Aside from looking too big, the stock signals hang/droop pretty significantly from the DP fender eliminator (more so then when they were mounted to the stock bracket). Does anyone know whether the euro signals will fit flushly without hanging/drooping off of the DP fender eliminator?

August 26th, 2012, 08:12 PM	#32
iiiofiv Senior Member Joined: May 2012 From: San Francisco Posts: 219 Thanks: 1 I Ride: Ducati: S4RS Tricolore, 1199S Tricolore; Triumph: Tiger 1050, Thunderbird 1700	I installed them too. Took less than an hour and they really are plug-n-play. They look so much better than the stockers.

August 28th, 2012, 11:29 AM	#36
allesisvoorbassie Member Joined: Jan 2012 From: The Netherlands Posts: 34 Thanks: 2 I Ride: `10 848-----`12 Panigale Silk White!!	If there is someone who want to have mine,I give them for free the only thing you have to pay is the shipping to your adress!!

September 1st, 2012, 03:37 PM	#37
NoGoodID Member Joined: Mar 2012 From: Las Vegas, NV Posts: 97 Thanks: 0 I Ride: 2012 Ducati 1199 Panigale S (ABS); and 2010 BMW K1300S	Had the Ducati euro lights installed yesterday...they look great...but mine do sag just a little (but a lot less than the stock lights did).

September 1st, 2012, 05:33 PM	#38
Svendiesel Member Joined: Aug 2012 From: Northern NJ Posts: 73 Thanks: 5	This is definitely something Id like to do, great idea.