Custom fender eliminator - Page 4

jimmymendoza · August 29th, 2012, 09:20 AM

Quote:

Originally Posted by BUCCI

UPDATE:

The first of the prototypes are on the way! They should be here in 1-2 weeks. If the fitment is good and I like the shape then I will put in a large order and they will become available for purchase.

Let me know! Paypal ready!!

rm4two · August 29th, 2012, 10:55 AM

Quote:

Originally Posted by jimmymendoza

let me know! Paypal ready!!

+1 :d

SOULRIDER · August 29th, 2012, 02:25 PM

Quote:

Originally Posted by BUCCI

UPDATE:

The first of the prototypes are on the way! They should be here in 1-2 weeks. If the fitment is good and I like the shape then I will put in a large order and they will become available for purchase.

That looks so good.

I've waiting months for this. Well done brother.

PabloPwnage · August 29th, 2012, 03:45 PM

Quote:

Originally Posted by BUCCI

I got pulled over by a state trooper yesterday and he looked directly at my plate, didn't mention a thing. However he wated to know why I didn't have mirrors

Haha, what did you tell him?

Did you setup integrated turn signals into the LED brake lights or do you just use hand signals now, Bucci? Integrated turn signals is something I want sooooo bad for the Pani...

LarryG · August 29th, 2012, 04:03 PM

Quote:

Originally Posted by jimmymendoza

Let me know! Paypal ready!!

Me too....

Louis · September 5th, 2012, 09:20 AM

Bumpity! I just signed up on here to say that I want one

PM me when they are ready!

Louis

filthy animal · September 5th, 2012, 08:24 PM

After a few emails to Competition Werkes advising me their "integrated tail light" will soon be on their website, to my disappointment today, I noticed they now sell the fender eliminator kit for the Pani.......no integrated tail light which is the way to go in my opinion. For $150, I would rather just keep my $15 aluminum license plate bracket on. If you mount it close enough under the stock tail lights (just use the existing bolt holes) the rear operating lights shed enough light on it to luminate the plate to most po po standards. Comp Werkes placed LEDs in the vents. No thanks

fairing lurker · September 19th, 2012, 07:24 PM

Great start and the turn signals / integration can be sorted out separately I would imagine. Hiding them deep in the wells of the rear tail lights would seem to be key so they are seen when blinking and hidden when not. Something that would tie into the wiring harness that does not require cutting would be great. Also.. a small hole above the license plate mount would be great for a hidden LED to illuminate the license plate.

Again- great work..

Regards,
Mark

b1six · September 19th, 2012, 09:04 PM

I have the CW fender eliminator, screw a Lic. light, lemme at it BUCCI!

Theefiveoh · September 19th, 2012, 10:31 PM

Looks great bud! Can't wait to get my hands on one! I just finished making my own FE and plate mount but this is the last piece I am waiting for to finish the job. Any ideas on prices yet?

BUCCI · September 21st, 2012, 07:32 PM

Quote:

Originally Posted by b1six

I have the CW fender eliminator, screw a Lic. light, lemme at it BUCCI!

Quote:

Originally Posted by Theefiveoh

Looks great bud! Can't wait to get my hands on one! I just finished making my own FE and plate mount but this is the last piece I am waiting for to finish the job. Any ideas on prices yet?

Got a prototype in the other week and I was not pleased with fitment, so I have changed some dimensions and shape to make it fit better. Waiting for the second prototype to come in. Once it looks good I will be producing a large quantity.

I don't have an exact price yet, however I can tell you the rear cover will be available to purchase with or without a street kit (turn signals and LP light), both options come with an LP bracket. The full kit will be competitively priced compared to all other kits on the market, with the rear cover by itself being considerably cheaper.

unrazzo · September 21st, 2012, 10:24 PM

I'm so curious, how did you make the one for your bike?

Theefiveoh · September 24th, 2012, 01:00 PM

Quote:

Originally Posted by BUCCI

Got a prototype in the other week and I was not pleased with fitment, so I have changed some dimensions and shape to make it fit better. Waiting for the second prototype to come in. Once it looks good I will be producing a large quantity.

I don't have an exact price yet, however I can tell you the rear cover will be available to purchase with or without a street kit (turn signals and LP light), both options come with an LP bracket. The full kit will be competitively priced compared to all other kits on the market, with the rear cover by itself being considerably cheaper.

Thanks for the update! Can't wait to see your end result product and slap one on my bike!

blaze182 · September 25th, 2012, 03:26 AM

I don't have my Panigale yet - dont suppose someone can upload a nice rear shot of their bike without this mod? Since every rear end shot online is covered in darkness

duc1199ky · October 20th, 2012, 08:10 AM

Any updates on this mod?

Caliz007 · November 15th, 2012, 05:49 PM

I'm waiting

BUCCI · November 15th, 2012, 11:14 PM

Quote:

Originally Posted by duc1199ky

Any updates on this mod?

Quote:

Originally Posted by Caliz007

I'm waiting

Can't believe it has taken me months to get a product but it is almost complete! Just fitted the first fiberglass version to my bike this week and fitment is good, will get the carbon version in next week. Should have stock in the next 2 weeks hopefully. Finishing up the LED for the LP bracket. Will post up pics soon! Sorry for the wait!

thewoot · February 4th, 2013, 03:06 PM

Is this still a thing?

Theefiveoh · February 4th, 2013, 05:28 PM

Quote:

Originally Posted by thewoot

Is this still a thing?

Yeah, really. Is this thing gonna happen? If not, do you know of any places that are selling something like it?

Zaid1199 · February 5th, 2013, 03:57 AM

Try competition werkes!

September 19th, 2012, 07:24 PM	#68
fairing lurker Junior Member Joined: Sep 2012 From: Grapevine, TX Posts: 6 Thanks: 3	Great work! - count me in Great start and the turn signals / integration can be sorted out separately I would imagine. Hiding them deep in the wells of the rear tail lights would seem to be key so they are seen when blinking and hidden when not. Something that would tie into the wiring harness that does not require cutting would be great. Also.. a small hole above the license plate mount would be great for a hidden LED to illuminate the license plate. Again- great work.. Regards, Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
competition werkes eliminator coming soon!	triplejay30349	Ducati 1199	4	June 26th, 2012 12:26 AM
Ducati 1199 fendor eliminator	Saleen823	Ducati 1199	9	June 20th, 2012 12:11 PM
custom number plates	mrmaloo32	Ducati 1199	25	June 1st, 2012 10:47 PM
Creating a custom 1199	Tricolore	Ducati 1199	20	November 25th, 2011 05:43 AM
Rear Fender Eliminator Kit for the 1199	duc	Ducati 1199	3	November 11th, 2011 07:09 PM

September 5th, 2012, 09:20 AM	#66
Louis Junior Member Joined: Sep 2012 From: Frisco, Tx Posts: 10 Thanks: 0	Bumpity! I just signed up on here to say that I want one PM me when they are ready! Louis

September 5th, 2012, 08:24 PM	#67
filthy animal Junior Member Joined: Sep 2012 From: SoCal Posts: 16 Thanks: 0 I Ride: 2006 Speed Triple, 2012 Panigale, KX 250 (my favorite of all)	After a few emails to Competition Werkes advising me their "integrated tail light" will soon be on their website, to my disappointment today, I noticed they now sell the fender eliminator kit for the Pani.......no integrated tail light which is the way to go in my opinion. For $150, I would rather just keep my $15 aluminum license plate bracket on. If you mount it close enough under the stock tail lights (just use the existing bolt holes) the rear operating lights shed enough light on it to luminate the plate to most po po standards. Comp Werkes placed LEDs in the vents. No thanks

September 19th, 2012, 09:04 PM	#69
b1six Senior Member Joined: Aug 2012 From: Yuba City CA Posts: 200 Thanks: 4 I Ride: The bees knees.	I have the CW fender eliminator, screw a Lic. light, lemme at it BUCCI!

September 19th, 2012, 10:31 PM	#70
Theefiveoh Senior Member Joined: Mar 2012 From: The Whales Vagina Posts: 244 Thanks: 2 I Ride: 1199 Base/ABS	Looks great bud! Can't wait to get my hands on one! I just finished making my own FE and plate mount but this is the last piece I am waiting for to finish the job. Any ideas on prices yet?

September 21st, 2012, 10:24 PM	#72
unrazzo Member Joined: May 2012 From: NorCal, USA Posts: 99 Thanks: 0 I Ride: 1199 Pani-awesome	I'm so curious, how did you make the one for your bike?

September 25th, 2012, 03:26 AM	#74
blaze182 Junior Member Joined: Sep 2012 From: Melbourne Posts: 3 Thanks: 0	I don't have my Panigale yet - dont suppose someone can upload a nice rear shot of their bike without this mod? Since every rear end shot online is covered in darkness

October 20th, 2012, 08:10 AM	#75
duc1199ky Junior Member Joined: Mar 2012 From: Glasgow, Ky, USA Posts: 25 Thanks: 0	Any updates on this mod?

November 15th, 2012, 05:49 PM	#76
Caliz007 Junior Member Joined: Nov 2012 From: Miami FL Posts: 14 Thanks: 0	I'm waiting

February 4th, 2013, 03:06 PM	#78
thewoot Senior Member Joined: May 2012 From: IA, US Posts: 144 Thanks: 10	Is this still a thing?

February 5th, 2013, 03:57 AM	#80
Zaid1199 Senior Member Joined: Jul 2012 From: MA Posts: 280 Thanks: 17 I Ride: 1199 Panigale	Try competition werkes!