Another Option for Plate relocation - for those who don't mind keeping passenger pegs - Page 2

Theefiveoh · August 21st, 2012, 07:38 AM

Quote:

Originally Posted by vik

here is my solution to cover the ugly hole! use this guide to cut a black PVC or plastic file cover. I used 3m automotive double tape to stick it over the hole!

What did you use for your turn signals? Do you have a link to where you bought them and or a video showing how well they work?

vik · August 21st, 2012, 08:13 AM

Quote:

Originally Posted by Theefiveoh

What did you use for your turn signals? Do you have a link to where you bought them and or a video showing how well they work?

LED Flexible Arrays - Amber - Chrome Glow

To have the same result you need to take the 20 leds length, smoked tubing

Don't try the bigger one if you want to put it on the same place, it fits perfectly but 20 are the maximum.

The install is really simple. No resistor needed, it s plug and play as long as you grab the original blinker connections.

The wire of the leds fits perfectly behind the fairings, it s invisible.

I've been under rain, washed the bike, no issues

specialized5223 · August 21st, 2012, 12:21 PM

Subscribing

LarryG · August 21st, 2012, 12:51 PM

Quote:

Originally Posted by vik

LED Flexible Arrays - Amber - Chrome Glow

To have the same result you need to take the 20 leds length, smoked tubing

Don't try the bigger one if you want to put it on the same place, it fits perfectly but 20 are the maximum.

The install is really simple. No resistor needed, it s plug and play as long as you grab the original blinker connections.

The wire of the leds fits perfectly behind the fairings, it s invisible.

I've been under rain, washed the bike, no issues

OK, so I'm assuming you have to buy 2 of the 20 LED, one for each side?

Theefiveoh · August 21st, 2012, 02:35 PM

Awesome man. Thanks!

trust7 · November 26th, 2012, 01:15 AM

20 is just a touch too long in my opinion and I took the entire tail apart to do the mod so im certain 20 will be just barely too long for people wanting to do this, the UPSIDE to getting the 20 and it being a little too long is that these LED's are bright as sin, so even though say 4 of the far right or left LED's are hidden it doesnt matter as the flash is so much brighter than most mods like this I have seen. I used a water bottle with 45degree edges and automotive 3m tape with 3m adhesion promotor, it makes a big big difference trust me.

You can also see in the pictures that I used the ASV levers both Shorty Black and although I LOVE ASV's levers I would actually order a shorty brake and a normal Clutch, the pivot point on the ASV shorty is just a touch shorter than stock making it ever slightly harder to pull and the clutch is heavy enough even though its hydraulic to make that a pain in the butt, couple buddies like it fine but I may order a normal clutch lever.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
For Sale: 1199 passenger pegs	tstephenson	Classifieds	0	July 19th, 2012 01:41 PM
CaliDuc - USA Fully Sorted Tricolore with Passenger Pegs and some WARNINGS !!!	CaliDuc	Ducati 1199	47	June 26th, 2012 06:49 PM
How to fit Passenger Pegs	AntiHero	Ducati 1199	10	June 9th, 2012 12:38 AM
the base 1199 panigale has normal lighting... is there a LED option? like the ''S''	Quinten	Ducati 1199	53	May 12th, 2012 03:40 AM
Ducati NA announces 1199 std with ABS option	Dave R	Ducati 1199	11	December 9th, 2011 06:08 PM

August 21st, 2012, 12:21 PM	#23
specialized5223 Junior Member Joined: Jul 2012 From: Rochester, NY Posts: 19 Thanks: 1	Subscribing

August 21st, 2012, 02:35 PM	#25
Theefiveoh Senior Member Joined: Mar 2012 From: The Whales Vagina Posts: 244 Thanks: 2 I Ride: 1199 Base/ABS	Awesome man. Thanks!

November 26th, 2012, 01:15 AM	#26
trust7 Junior Member Joined: Nov 2012 From: Dallas, texas Posts: 23 Thanks: 0	20 is just a touch too long in my opinion and I took the entire tail apart to do the mod so im certain 20 will be just barely too long for people wanting to do this, the UPSIDE to getting the 20 and it being a little too long is that these LED's are bright as sin, so even though say 4 of the far right or left LED's are hidden it doesnt matter as the flash is so much brighter than most mods like this I have seen. I used a water bottle with 45degree edges and automotive 3m tape with 3m adhesion promotor, it makes a big big difference trust me. You can also see in the pictures that I used the ASV levers both Shorty Black and although I LOVE ASV's levers I would actually order a shorty brake and a normal Clutch, the pivot point on the ASV shorty is just a touch shorter than stock making it ever slightly harder to pull and the clutch is heavy enough even though its hydraulic to make that a pain in the butt, couple buddies like it fine but I may order a normal clutch lever.