New Part Preview! - Page 2

PaddockStand · September 29th, 2012, 03:47 PM

I think I'd prefer powercoat too, an exact match for the paint. Red anodised stuff always looks washed out and a bit pink.

Lux Machine · September 29th, 2012, 04:12 PM

Quote:

Originally Posted by PaddockStand

I think I'd prefer powercoat too, an exact match for the paint. Red anodised stuff always looks washed out and a bit pink.

I hear you. I will offer both. I am a fan of anodizing myself. Hard anodizing stays red from what I have seen. This is why I am posting before I make them. I want to get you guys feed back so that I deliver what you guys want. Thanks for all the comments!
Dylan

akdave8 · September 29th, 2012, 04:46 PM

Looks good.. I'd be in for a red matching paint color one as well..

michaeldorian · September 29th, 2012, 11:04 PM

Awesome stuff. Want!

jimmymendoza · September 30th, 2012, 12:08 AM

Add to cart!!!!

Theefiveoh · September 30th, 2012, 12:58 AM

Sold! I was going to send my Yoshimura block off plates to TRIPAGE LED to have him install some LED's but this may be my option. I especially like the idea of having them red instead of black like all the other ones. I'm subscribed and anxious to see the final product.

Lux Machine · September 30th, 2012, 05:38 AM

Thanks for all the great responses. With all the great reactions I am going to put these on the super fast track. I am going to push to get these out very soon. I will put up pics and video of my progress! Thanks again for all the great comments!
Dylan
Lux-Machine

Delta One · September 30th, 2012, 06:48 AM

Nice idea! Looks good!

flobrandx · September 30th, 2012, 06:48 AM

looks like it will be a great product with all the input from the forum members.

Key points I think are the plug and play and color matched to fairing.

Will this be DOT approved? Does it need to be?

unsaif · September 30th, 2012, 06:59 AM

awesome idea...sign me up!

Trauma · September 30th, 2012, 07:33 AM

So would everybody interested in this, have it along with barend mirrors, be a perm setup, on/off track?

Lux Machine · September 30th, 2012, 08:22 AM

Quote:

Originally Posted by flobrandx

looks like it will be a great product with all the input from the forum members.

Key points I think are the plug and play and color matched to fairing.

Will this be DOT approved? Does it need to be?

DOT approved question pending. They will be plug and play and color matched. You will unscrew your mirrors unplug them. Plug in ours and screw them down and you are ready to go! Thanks!

BigBoost · September 30th, 2012, 09:30 AM

Quote:

Originally Posted by No Trellis

I hope the LEDs will be super bright. Like your project and will get them. Please look into getting hold of the OEM connectors as I heard they are hard to find. Thanks

+1 Also VERY interested, as long as it's a clean install and look.

Very interested, but has to be clean install and look.

Gulf Coast · September 30th, 2012, 05:10 PM

I agree that this could make the bike look real clean at the front end but are you all going to ride without mirrors or stick bar end mirrors in? The mirrors are, I know, pretty useless but at least they give you some sort of rear view. And IMHO the bar ends dont make the bike look like the stallion it is? More cafe racer i think. Although today my left mirror started flopping around in the housing so maybe theyre completely useless?!?!

Stw · September 30th, 2012, 05:11 PM

Quote:

Originally Posted by Gulf Coast

I agree that this could make the bike look real clean at the front end but are you all going to ride without mirrors or stick bar end mirrors in? The mirrors are, I know, pretty useless but at least they give you some sort of rear view. And IMHO the bar ends dont make the bike look like the stallion it is? More cafe racer i think. Although today my left mirror started flopping around in the housing so maybe theyre completely useless?!?!

I plan on this mod and Rizoma Bar end mirrors

Lux Machine · September 30th, 2012, 05:27 PM

On my list of parts next are bar end mirrors, but not your usual type. They are going to be really slick. They will totally fit the style of the Ducati SBK. We have block offs/turn signals coming out for the 1098 and 1198 next close to what these look like. After that we will have reservoir caps. Then the mirrors and...............

mig1199 · October 1st, 2012, 01:19 AM

Quote:

Originally Posted by Lux Machine

Glad you guys are digging them so far. To answer some of the comments. Yes they will be plug and play. I have a source for the OEM connectors. The LED will be bright. When I get the prototypes in next week I will post up a video of them running. I will offer them in black, red and raw(silver). They LED's will be the same color as the block offs. ie-Black/black, red/red, silver(raw)/Clear LED. I will keep you guys posted!
Thanks Dylan

Awesome Lux machine!!!! I'll go for either anodized red or black...for as long as the LED's are bright enough to be seen blinking...I'm gettin a set!

Please let us know asap!!!!!

Miguel B.
Philippines

Sleekstyle · October 1st, 2012, 07:01 AM

Group buy anyone ? Lets do this ! What you think Lux ?

nyandy · October 1st, 2012, 07:01 AM

this rules! can't wait for em! hopefully stock connectors w/ no resistors!!!

nyandy · October 1st, 2012, 07:02 AM

Quote:

Originally Posted by Sleekstyle

Group buy anyone ? Lets do this ! What you think Lux ?

i'm all about this as well if it happens.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
Part Number verification help please.	Rocky907	Mechanical and Technical	2	August 16th, 2012 06:24 AM
Need help Finding Part	tstephenson	Ducati 1199	4	July 29th, 2012 07:51 AM
Whats Your Favourite DP Part?	Xbox	Ducati 1199	16	April 19th, 2012 11:48 AM
2012 Ducati 1199 Panigale Preview	duc	Ducati 1199	0	November 17th, 2011 12:08 PM

September 29th, 2012, 03:47 PM	#21
PaddockStand Senior Member Joined: Jan 2012 From: Jersey, UK Posts: 439 Thanks: 25 I Ride: Daytona 675 SE + 1199S ABS	I think I'd prefer powercoat too, an exact match for the paint. Red anodised stuff always looks washed out and a bit pink.

September 29th, 2012, 04:46 PM	#23
akdave8 Member Joined: Mar 2012 From: clinton township, MI Posts: 67 Thanks: 5	Looks good.. I'd be in for a red matching paint color one as well..

September 29th, 2012, 11:04 PM	#24
michaeldorian Senior Member Joined: Feb 2012 From: Seattle, WA Posts: 109 Thanks: 6	Awesome stuff. Want!

September 30th, 2012, 12:08 AM	#25
jimmymendoza Senior Member Joined: Jul 2012 From: Lower Merion Posts: 203 Thanks: 1 I Ride: "Lamborghini, Pani...your chick she's so thirsty"	Add to cart!!!!

September 30th, 2012, 12:58 AM	#26
Theefiveoh Senior Member Joined: Mar 2012 From: The Whales Vagina Posts: 244 Thanks: 2 I Ride: 1199 Base/ABS	Sold! I was going to send my Yoshimura block off plates to TRIPAGE LED to have him install some LED's but this may be my option. I especially like the idea of having them red instead of black like all the other ones. I'm subscribed and anxious to see the final product.

September 30th, 2012, 05:38 AM	#27
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	Thanks for all the great responses. With all the great reactions I am going to put these on the super fast track. I am going to push to get these out very soon. I will put up pics and video of my progress! Thanks again for all the great comments! Dylan Lux-Machine

September 30th, 2012, 06:48 AM	#28
Delta One Senior Member Joined: Mar 2012 From: Dubai UAE Posts: 466 Thanks: 11 I Ride: 1199 Panigale S Tricolore and an 848	Nice idea! Looks good!

September 30th, 2012, 06:48 AM	#29
flobrandx Senior Member Joined: Jun 2012 From: Battle Ground,WA Posts: 716 Thanks: 74 I Ride: 1199 Panigale S Tricolore	looks like it will be a great product with all the input from the forum members. Key points I think are the plug and play and color matched to fairing. Will this be DOT approved? Does it need to be?

September 30th, 2012, 06:59 AM	#30
unsaif Junior Member Joined: Aug 2012 From: abu dhabi Posts: 3 Thanks: 0	awesome idea...sign me up!

September 30th, 2012, 07:33 AM	#31
Trauma Senior Member Joined: Jun 2012 From: St. Louis Posts: 3,733 Thanks: 642 I Ride: 1199 ABS, K1300S, ZX7R	So would everybody interested in this, have it along with barend mirrors, be a perm setup, on/off track?

September 30th, 2012, 05:10 PM	#34
Gulf Coast Senior Member Joined: May 2012 From: East Bay Area, San Fran Posts: 272 Thanks: 3	I agree that this could make the bike look real clean at the front end but are you all going to ride without mirrors or stick bar end mirrors in? The mirrors are, I know, pretty useless but at least they give you some sort of rear view. And IMHO the bar ends dont make the bike look like the stallion it is? More cafe racer i think. Although today my left mirror started flopping around in the housing so maybe theyre completely useless?!?!

September 30th, 2012, 05:27 PM	#36
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	On my list of parts next are bar end mirrors, but not your usual type. They are going to be really slick. They will totally fit the style of the Ducati SBK. We have block offs/turn signals coming out for the 1098 and 1198 next close to what these look like. After that we will have reservoir caps. Then the mirrors and...............

October 1st, 2012, 07:01 AM	#38
Sleekstyle Member Joined: Sep 2012 From: SoCal Posts: 80 Thanks: 0 I Ride: Panigale / Fireblade	Group buy anyone ? Lets do this ! What you think Lux ?

October 1st, 2012, 07:01 AM	#39
nyandy Senior Member Joined: Apr 2012 From: Newburgh, NY Posts: 240 Thanks: 42	this rules! can't wait for em! hopefully stock connectors w/ no resistors!!!