New Part Preview! - Page 4

thudson · October 4th, 2012, 04:10 PM

Keep us updated!!! I will certainly purchase them!!! The mirrors below are what I was planning to use since they provided a much better coverage.

[

Lux Machine · October 4th, 2012, 04:26 PM

Link didn't show up and thanks I will post every step of the way!

Lux Machine · October 4th, 2012, 04:39 PM

Quote:

Originally Posted by Trauma

I'll be in Dallas the 17th, can I stop by and pick up a pair?

If I have some yes of course! Shoot me a PM with your info.
Dylan

southeastduc · October 4th, 2012, 05:36 PM

Lux, make it plug & play and I think you'll get a lot of interest. I have some CRG Arrows from former bike, but definitely interested in what you come up with instead of them. You'll need to fabricate some nice heavy bar end adapters that screw into the bars for your mirrors.....

Lux Machine · October 4th, 2012, 05:52 PM

They will be plug and play. I found a line on the connectors. I will keep you updated. Thanks for all the great comments!
Dylan

thudson · October 4th, 2012, 07:44 PM

[URL="http://http://www.tankprotectorpad.info/end-mirrors-ducati/"]http://http://www.tankprotectorpad.info/end-mirrors-ducati/[/URL

vik · October 5th, 2012, 06:07 AM

Quote:

Originally Posted by Lux Machine

We are getting closer!! Here is a shot of our new part in the raw. Lux Machine

i have the same leds mounted for my rear turn signals and these are super bright.

cmon man whats the hold up! i WANT this part. NOW!!!

and waiting to see your barend design....

Lux Machine · October 5th, 2012, 08:23 AM

@Vik
We are tryin to get them out ASAP! I will post more pics as we move along. The lights are super bright and the still flash as amber even through the smoked lens. Thanks for all the great feedback guys!
Dylan

PannyofDoom · October 5th, 2012, 10:40 AM

ETA? lol

I hope these are under 100 bucks

Lux Machine · October 7th, 2012, 06:29 PM

Quote:

Originally Posted by PannyofDoom

ETA? lol

I hope these are under 100 bucks

I should have photos and videos of the finished prototypes up here by mid week. I will be putting the numbers together Monday and will post'em up by mid week too.
I will put all the info up here first!!
Thank you guys so much for all the great comments! For all those who dig these I will have a version for the 1098 soon too!
Thanks Dylan

elitesoldier357 · October 7th, 2012, 07:41 PM

Dang guys! Aren't you asking a lot from the man? lol Would you like them to be hand delivered and fitted by a supermodel too?

BigBoost · October 8th, 2012, 05:16 AM

Quote:

Originally Posted by elitesoldier357

Dang guys! Aren't you asking a lot from the man? lol Would you like them to be hand delivered and fitted by a supermodel too?

That would work....lol.

Hurry up already & + one on powder coating for color.

Lux Machine · October 8th, 2012, 06:47 AM

Ha! I will get the pics and video up asap. I am glad you guys are as excited as me! Thanks for all the interest!
Dylan

Lux Machine · October 8th, 2012, 06:49 AM

Quote:

Originally Posted by elitesoldier357

Dang guys! Aren't you asking a lot from the man? lol Would you like them to be hand delivered and fitted by a supermodel too?

Than would be a hell of a great marketing ploy! I like it. Hmm.................
do I know any super models? Maybe!
Stay Tuned!

Trauma · October 8th, 2012, 08:12 AM

Quote:

Originally Posted by Lux Machine

Than would be a hell of a great marketing ploy! I like it. Hmm.................
do I know any super models? Maybe!
Stay Tuned!

Maybe you can borrow some from Bellissimoto!!

BellissiMoto - Our Beautiful Models

Lux Machine · October 8th, 2012, 11:47 AM

Quote:

Originally Posted by Trauma

Maybe you can borrow some from Bellissimoto!!

BellissiMoto - Our Beautiful Models

..............and the casting couch is being dusted off as we speak! Bellisimoto you are true champions!

ducdom · October 8th, 2012, 04:25 PM

This part is exactly what I was looking for.

Lux Machine · October 12th, 2012, 06:20 AM

Got the prototypes cut, powdercoated and ready to mount up. I will be doing so first thing Saturday morning! I will post pics and video shortly after! Stay Tuned!
Dylan

11ninenine · October 12th, 2012, 06:48 AM

mr anderson · October 12th, 2012, 07:18 AM

if the price is right the next time I head down to the dealership in Dallas, I might stop by your place and pick a set up for myself.

October 4th, 2012, 07:44 PM	#66
thudson Junior Member Joined: Feb 2012 From: Mpls MN Posts: 21 Thanks: 0 I Ride: Sold ZX 14, Sold R1, Sold ZX 9, Own 1199s w/abs	[URL="http://http://www.tankprotectorpad.info/end-mirrors-ducati/"]http://http://www.tankprotectorpad.info/end-mirrors-ducati/[/URL Last edited by thudson; October 4th, 2012 at 07:45 PM. Reason: link that did not go through earlier

October 8th, 2012, 06:47 AM	#73
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	Ha! I will get the pics and video up asap. I am glad you guys are as excited as me! Thanks for all the interest! Dylan Thanks from dyd666

October 12th, 2012, 07:18 AM	#80
mr anderson Senior Member Joined: Nov 2011 From: moore, ok Posts: 128 Thanks: 6 I Ride: '12 1199 Panigale S Tricolore, '11 Diavel Carbon black	if the price is right the next time I head down to the dealership in Dallas, I might stop by your place and pick a set up for myself. Last edited by mr anderson; October 12th, 2012 at 11:34 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
Part Number verification help please.	Rocky907	Mechanical and Technical	2	August 16th, 2012 06:24 AM
Need help Finding Part	tstephenson	Ducati 1199	4	July 29th, 2012 07:51 AM
Whats Your Favourite DP Part?	Xbox	Ducati 1199	16	April 19th, 2012 11:48 AM
2012 Ducati 1199 Panigale Preview	duc	Ducati 1199	0	November 17th, 2011 12:08 PM

October 4th, 2012, 04:10 PM	#61
thudson Junior Member Joined: Feb 2012 From: Mpls MN Posts: 21 Thanks: 0 I Ride: Sold ZX 14, Sold R1, Sold ZX 9, Own 1199s w/abs	Keep us updated!!! I will certainly purchase them!!! The mirrors below are what I was planning to use since they provided a much better coverage. [

October 4th, 2012, 04:26 PM	#62
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	Link didn't show up and thanks I will post every step of the way!

October 4th, 2012, 05:36 PM	#64
southeastduc Senior Member Joined: Jun 2012 From: Florida Posts: 310 Thanks: 24 I Ride: 2012 1199 ABS, 2009 YZ450F	Lux, make it plug & play and I think you'll get a lot of interest. I have some CRG Arrows from former bike, but definitely interested in what you come up with instead of them. You'll need to fabricate some nice heavy bar end adapters that screw into the bars for your mirrors.....

October 4th, 2012, 05:52 PM	#65
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	They will be plug and play. I found a line on the connectors. I will keep you updated. Thanks for all the great comments! Dylan

October 5th, 2012, 08:23 AM	#68
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	@Vik We are tryin to get them out ASAP! I will post more pics as we move along. The lights are super bright and the still flash as amber even through the smoked lens. Thanks for all the great feedback guys! Dylan

October 5th, 2012, 10:40 AM	#69
PannyofDoom Senior Member Joined: Apr 2012 From: Seattle, WA Posts: 246 Thanks: 9 I Ride: 1199 Tricolore (of DOOM)	ETA? lol I hope these are under 100 bucks

October 7th, 2012, 07:41 PM	#71
elitesoldier357 Senior Member Joined: May 2012 From: Lansing, Michigan Posts: 604 Thanks: 61 I Ride: Ducati 1199 Base Model	Dang guys! Aren't you asking a lot from the man? lol Would you like them to be hand delivered and fitted by a supermodel too?

October 8th, 2012, 04:25 PM	#77
ducdom Junior Member Joined: Oct 2012 From: USA/SWITZERLAND Posts: 28 Thanks: 6 I Ride: St4s/999/1198s/1199/gsxr750	This part is exactly what I was looking for.

October 12th, 2012, 06:20 AM	#78
Lux Machine Member Joined: Aug 2012 From: Dallas, TX Posts: 87 Thanks: 5	Got the prototypes cut, powdercoated and ready to mount up. I will be doing so first thing Saturday morning! I will post pics and video shortly after! Stay Tuned! Dylan

October 12th, 2012, 06:48 AM	#79
11ninenine Senior Member Joined: Apr 2012 From: Canada Posts: 139 Thanks: 9