1098/1198 parts that fit the pani

big rocky · May 7th, 2012, 12:02 AM

can anyone who knows what parts are transferable from other models that fit the 1199 post them up be nice to compile a list

cheers chaps

Desmo Dave · May 7th, 2012, 12:37 AM

Here's what I know:
Rear wheel
Clip ons on S model only. 53mm ohlins forks. They will be slightly shorter in length.
rear hub nut. Both sides. (Later 1098 hub)
Sprocket carrier, sprocket and nuts.
Front discs.
Various fairing bolts and fixings.

I'll be checking the front wheel this week. I know the shaft is Diavel fitting but yet to see if 1#98 hub is the same.

bolds · May 7th, 2012, 02:50 AM

Quote:

Originally Posted by Desmo Dave

Here's what I know:
Rear wheel
Clip ons on S model only. 53mm ohlins forks. They will be slightly shorter in length.REMEMBER STREERING DAMPER BOLTS TO RHS CLIP ON
rear hub nut. Both sides. (Later 1098 hub)
Sprocket carrier, sprocket and nuts.
Front discs.
Various fairing bolts and fixings.

I'll be checking the front wheel this week. I know the shaft is Diavel fitting but yet to see if 1#98 hub is the same.

1098 HUB IS NARROWER DISCS NEED SPACING 7.5mm each side AND WHEEL SPACERS ARE NEEDED 32mm LHS and 17mm RHS

AntiHero · October 5th, 2012, 12:50 PM

Front Brake Pads. EBC 61-1452 are listed for the 1098S as well as the 1199 (and a few other models). About $280 cheaper for both sets than the dealer charges.

Desmo Dave · October 7th, 2012, 01:24 AM

Quote:

Originally Posted by bolds

1098 HUB IS NARROWER DISCS NEED SPACING 7.5mm each side AND WHEEL SPACERS ARE NEEDED 32mm LHS and 17mm RHS

OZ wheels from the 1098/1198 can now be fitted to the 1199 with the spacer kit part# KIT 1199 available from OZ importers. Cost is approx £180. Available now.

May 7th, 2012, 12:02 AM	#1
big rocky Senior Member Joined: Mar 2012 From: lancashire Posts: 135 Thanks: 0	1098/1198 parts that fit the pani can anyone who knows what parts are transferable from other models that fit the 1199 post them up be nice to compile a list cheers chaps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
For Sale: Ducati 1098 R and HyperMotard Evo SP	Daz	Classifieds	1	September 17th, 2012 09:17 PM
Levers same as 848/1098/1198?	sajonf	Ducati 1199	0	May 3rd, 2012 04:51 PM
For Sale: 1198 Performance Parts and Carbon Fiber	bbauditt	Classifieds	2	May 3rd, 2012 11:07 AM
Will 1098/1099 wheels fit the 1199?	Daz	Ducati 1199	16	April 1st, 2012 09:10 AM
1198 vs 1199 engine	barry bubbles	Ducati 1199	16	February 15th, 2012 05:30 AM

May 7th, 2012, 12:37 AM	#2
Desmo Dave Senior Member Joined: Nov 2011 From: Surrey/Hants Posts: 109 Thanks: 4 I Ride: 1199 ABS	Here's what I know: Rear wheel Clip ons on S model only. 53mm ohlins forks. They will be slightly shorter in length. rear hub nut. Both sides. (Later 1098 hub) Sprocket carrier, sprocket and nuts. Front discs. Various fairing bolts and fixings. I'll be checking the front wheel this week. I know the shaft is Diavel fitting but yet to see if 1#98 hub is the same.

October 5th, 2012, 12:50 PM	#4
AntiHero Senior Member Joined: Nov 2011 From: LA to SF to NY and Back Posts: 597 Thanks: 169	Front Brake Pads. EBC 61-1452 are listed for the 1098S as well as the 1199 (and a few other models). About $280 cheaper for both sets than the dealer charges.