1098 wheels on 1199

Desmo Dave · July 10th, 2012, 05:39 AM

Trying to sort out the Oz wheels I kept from my 1198 SP to fit to the 1199.

I remember seeing someone posting spacers dimensions here but cannot find the thread.

Any help would be much appreciated.

Desmolvr · July 18th, 2012, 06:14 PM

Dave - I asked on another forum and motowheels answered. The rear will fit but the front wheel hub is like 15mm wider so the front will not work on the 1199. You could have spacers made as the rotors will work.

Desmo Dave · July 18th, 2012, 11:08 PM

Thanks.for that.
I have found a spacer kit.for BST wheels here.
Kit trasformazione Cerchi Anteriore 1098 a 1199 Panigale - 207.00EUR : RAM ITALIA srl, piazza la tua moto in pole position

Valen75 · July 18th, 2012, 11:12 PM

fitted my "old" BST that was on my SF1098 on the 1199 so I can give you the spacers sizes

So in cm (euro size)

You need spacers that goes behind the brake disc that are 7,5mm each
Then on the wheel axe the spacers size is:
- for the "small one": 3,8 cm total (2,3cm for the part that is "outside" the wheel axe)
- for the "long one": 4,7 cm total (3,2cm for the part that is "outside" the wheel axe")

Here is a picture of the kit for BST

Desmolvr · July 19th, 2012, 05:30 AM

I wonder if the kit would work on the Marchasini's as well.

Valen75 · July 19th, 2012, 06:24 AM

I don't see any reasons that the brake spacers doesn't work BST were more or less plug and play on the previous generation so it should share the same "tweaking" to bolt of the 1199

Desmo Dave · October 5th, 2012, 09:12 PM

Jus to let you know that OZ wheels now have a spacer kit available to convert 1*98 wheels to the Panigale.
Part number is Kit-1199

July 10th, 2012, 05:39 AM	#1
Desmo Dave Senior Member Joined: Nov 2011 From: Surrey/Hants Posts: 109 Thanks: 4 I Ride: 1199 ABS	1098 wheels on 1199 Trying to sort out the Oz wheels I kept from my 1198 SP to fit to the 1199. I remember seeing someone posting spacers dimensions here but cannot find the thread. Any help would be much appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Ducati 1199 Discussions
Thread	Thread Starter	Forum	Replies	Last Post
For Sale: 1199 Panigale S wheels --zero miles	1098Rman	Classifieds	16	September 9th, 2012 07:30 PM
Want To Buy: Stock OEM 1199 S Wheels	michaeldorian	Want To Buy	4	September 4th, 2012 01:27 PM
For Sale: MOST LIKELY- stock wheels off my 1199 Tri	Gunny Fitz	Classifieds	4	July 2nd, 2012 08:06 AM
Is the 1098 more fun?	DesiDude	Ducati 1199	18	May 31st, 2012 01:45 AM
Will 1098/1099 wheels fit the 1199?	Daz	Ducati 1199	16	April 1st, 2012 09:10 AM

July 18th, 2012, 06:14 PM	#2
Desmolvr Junior Member Joined: Jul 2012 From: California Posts: 13 Thanks: 0	Dave - I asked on another forum and motowheels answered. The rear will fit but the front wheel hub is like 15mm wider so the front will not work on the 1199. You could have spacers made as the rotors will work.

July 18th, 2012, 11:08 PM	#3
Desmo Dave Senior Member Joined: Nov 2011 From: Surrey/Hants Posts: 109 Thanks: 4 I Ride: 1199 ABS	Thanks.for that. I have found a spacer kit.for BST wheels here. Kit trasformazione Cerchi Anteriore 1098 a 1199 Panigale - 207.00EUR : RAM ITALIA srl, piazza la tua moto in pole position

July 18th, 2012, 11:12 PM	#4
Valen75 Member Joined: Apr 2012 From: France Posts: 85 Thanks: 0	fitted my "old" BST that was on my SF1098 on the 1199 so I can give you the spacers sizes So in cm (euro size) You need spacers that goes behind the brake disc that are 7,5mm each Then on the wheel axe the spacers size is: - for the "small one": 3,8 cm total (2,3cm for the part that is "outside" the wheel axe) - for the "long one": 4,7 cm total (3,2cm for the part that is "outside" the wheel axe") Here is a picture of the kit for BST

July 19th, 2012, 05:30 AM	#5
Desmolvr Junior Member Joined: Jul 2012 From: California Posts: 13 Thanks: 0	I wonder if the kit would work on the Marchasini's as well.

July 19th, 2012, 06:24 AM	#6
Valen75 Member Joined: Apr 2012 From: France Posts: 85 Thanks: 0	I don't see any reasons that the brake spacers doesn't work BST were more or less plug and play on the previous generation so it should share the same "tweaking" to bolt of the 1199

October 5th, 2012, 09:12 PM	#7
Desmo Dave Senior Member Joined: Nov 2011 From: Surrey/Hants Posts: 109 Thanks: 4 I Ride: 1199 ABS	Jus to let you know that OZ wheels now have a spacer kit available to convert 1*98 wheels to the Panigale. Part number is Kit-1199